Ok Guys... Have been in discussion with the guys from Ignition Controls and they do sim racing button boxes. I have also cleared this with Hess from PAGNIAN so i am not stepping on any toes. None of our site sponsors can supply this stuff at this stage.... He is possibly prepared to do a small discount based on how many we may order and what models.... SO, Is anyone interested in these ? There are 2 types (see below) BASIC : 2 models which range between $79 US and $89 US.....his comments to me in his reply below.... http://www.ignitioncontrols.com/category-s/147.htm NB0 .......................................... NB1 ADVANCED : 3 model range between $179.00 US and $299.00 US, and include LED switches and 100% Rotary encoder operation http://www.ignitioncontrols.com/category-s/148.htm NB3 LED ........................................ NA1 LED................................. NA1 LED (silver) PRINTS : http://www.ignitioncontrols.com/category-s/150.htm The following is a reply from "Rem".... "Hi, All our button boxes are Plug&Play. Advanced types are already programmed. You just need to assign controls in-game. NB0 (basic) has only buttons and toggles, its 100% reliable.NB1 (basic) has one rotary encoder which was requested by people from PCars community, so they can use it (yes with some cons) but its just added value without much cost increase. But if you expect 100% encoder operation get PC version or one of PC/PS4 advanced types. If you still prefer lower cost version and 100% reality I can replace encoder (in NB1) with standard two-way toggle. I have just updated our premium stock -check NA1LED (advanced) (and its silver version!). Remember Advanced types have ability to use non-momentary toggles -they stay in up / down positions (like home light switches). Also all buttons and switches in Advanced types are premium quality -for the smoothness, quality, look... I don't expect big changes in NA1LED in the future except different types of LED pushbuttons. The new stock will be slightly thicker too as it'll easier for us to assemble)" So if anyone is interested in this product please reply below...i will be sending Rem a link to this page for him to see any response / interest... Interested... 1. Stu - NB3 LED + color on black labels 2. @Rolz 3. @KoAStR ? NB0 or NB1 4. @garyw61 - NB0 + black sticker set 5. @Zharvs92 - NB1 + black labels 6. @v8power383 - NB1 and color on black labels 7. @SPL Racing - NB1 8. @Killercarlcox69 - NB3LED 9. @Anon666 - NB3 LED + color on black labels 10. @KoAStR - NB1 and a colour on black labels Cheers stu
Now I'm using the Rift it would be good to get one... but I'm running out of USB ports!! Plus wondering how I'm going to mount it.
Should be easy enough to mount, i was going to use double sided tape on my IPAD mount that i got off ebay...
Your kidding me right !!!! ( on the fly ) There is a rescission going on and there are a thousand clowns out of work and your trying to be funny !
My shifter on the G25 is retiring... i was going to remount it elsewhere to keep the buttons available especially as there's only 2 on the wheel. But might consider a box. Would probably go just basic. Not sure what I would use a rotary encoder for... interested but not committed
definately interested, just unsure what i would use that amount of buttons for. anyone else who is gonna get one wanna enlighten me as to ideas of setup.
just need to work out how we can do it....might be able to deal direct with them for payment, or a code or something....